Originals; G Originals That Can Be Faxed; Originals That Can Be Faxed - Sharp AR-FX10 Operation Manual

ORIGINALS

ORIGINALS THAT CAN BE FAXED

I I I I Original sizes
Using the reversing
automatic document
feeder
Using the document glass
NOTE
Originals that are not a standard size (A5, B5, B5R, A4, A4R, B4, A3, 5-1/2"x8-1/2", 8-1/2"x11", 8-1/2"x11"R,
8-1/2"x14", 11"x17") can also be faxed.
I I I I Scanning area of original
Note that the edges of an original cannot be scanned.
Area that cannot be scanned: 2mm±2mm at edges of original
I I I I Automatic reduction of faxed document
If the size (width) of the faxed document is greater than the receiving machine's paper size, the size will be
automatically reduced.
Faxed document width
A3 (11"x17")
A3 (11"x17")
A document can also be faxed without reducing its size. In this case, the left and right edges will not be
transmitted. (See "Auto reduction sending setting" on page 8-7.)
1-6
Minimum original size
A5: 210 mm (width) x 148 mm (length)
(8-1/2" (width) x 5-1/2" (length))
A5R: 148 mm (width) x 210 mm (length)
(5-1/2" (width) x 8-1/2" (length))
Receiving machine's paper width
B4 (8-1/2"x14")
A4 (8-1/2"x11")
Maximum original size
297 mm (width) x 431.8 mm* (length)
(11" (width) x 17"* (length))
* Long documents can not be loaded
Reduced size
B4 (8-1/2"x14")
A4R (8-1/2"x11"R)
Ratio (Area ratio)
1 : 0.78 (1 : 0.64)
1 : 0.5 (1 : 0.5)