Job Complete - Xerox DocuColor 5252 System Administration Manual

Too l s M o de
2- 3 2

Job Complete

The Job Complete feature determines when the digital press
returns to the system default settings after a scanned job with
programmed settings is complete. If a user has completed a job
and failed to return the system settings to their default values by
pressing the Clear All button on the Control Panel, the machine
automatically restore the default settings after the amount of time
set in the Job Complete screen.
1
Touch the Job Complete button on the System Timers screen.
The Job Complete screen appears.
2
Use the up or down arrow buttons to change the time. The range
available is 1 to 10 minutes.
To use the system default time of 2 minutes, touch the System
Default button.
3
Touch the Enter button on the screen to enter the new time into
the system.
4
Touch the Close button to return to the Machine Defaults 1
screen, or select another timer to change.
D oc u Co l or 5 25 2 S y s te m A d mi n i s tr a ti o n G ui d e