F
eatures
Autodiscrimination between bar codes
The PTC-960X's application program can read
and automatically discriminate between up to
ten bar-code types. See the information provided
by your supervisor for the bar-code types your
PTC has been programmed to recognize.
Automatic off
To conserve battery power, the PTC-960X auto-
matically turns itself off after approximately 1
minute of inactivity. The exact length of time
depends on your application program.
Automatic return at on
When you turn off the PTC-960X (or when the
PTC-960X turns itself off), it remembers where
it was in the application. Then, when you turn
the PTC-960X back on, it returns to that same
point in the application. You do not need to re-
view what you have done or perform any other
start-up function to find your place.
Backlight
The screen has a backlight to light up the screen
and make information on the display readable in
low light. If your PTC's operating system is MS-
®
DOS
, you can turn the backlight on and off by
first pressing the FUNC key and then pressing
25