Recalling System Settings Of The Last Job - Konica Minolta Di5510 Advanced Information

3
3.8

Recalling System Settings of the Last Job

Recall the system settings of the last completed job to continue working
with same system settings.
Please note the following:
G Only the system settings of the last completed job can be recalled.
G
The system settings of the last job can also be recalled if the system
was switched off in the meantime.
1
Press the [Program Memory] key on
the control panel.
The Program Memory screen is
displayed.
2
Press the [Pre-Job Recall] key.
3
Press the [OK] key.
The basic options are displayed again. The system settings of the last
completed job are set.
3-34
Initial Steps . . .
Program Memory
Di5510/Di7210