Loading Paper Into The Large Capacity Tray - Konica Minolta 8020 User Manual

3

Loading Paper Into the Large Capacity Tray

1
Pull out the paper drawer.
2
Load paper into the right side of the drawer so that the front
side of the paper (the side facing up when the package was
unwrapped) faces up.
Note
If the paper is curled, flatten it before loading it.
Do not load so much paper that the top of the stack is higher than the Ä mark.
Paper other than plain paper cannot be fed from the large capacity tray.
If you wish to make copies onto paper other than plain paper, feed it through the manual bypass
tray or the 1st drawer.
When loading additional paper, remove any paper remaining in the drawer, place it on top of the
new paper, and then align the paper in the stack well before loading it into the drawer. We recom-
mend replenishing the paper only after all of the paper in the drawer has been used, otherwise a
paper misfeed may occur.
3
Load paper into the left side of the drawer so that the front
side of the paper (the side facing up when the package was
unwrapped) faces up.
Note
Do not load so much paper that the top of the stack is
higher than the Ä mark.
Paper other than plain paper cannot be fed from the
large capacity tray.
If you wish to make copies onto paper other than plain paper, feed it through the manual bypass
tray or the 1st drawer.
The paper guide in the large capacity tray has been installed for Letter C-size paper.
When loading additional paper, remove any paper remaining in the drawer, place it on top of the
new paper, and then align the paper in the stack well before loading it into the drawer. We recom-
mend replenishing the paper only after all of the paper in the drawer has been used, otherwise a
paper misfeed may occur.
4
Close the paper drawer.
"Specialty Paper" function
The paper loaded into the large capacity tray (3rd drawer) can be specified as special paper.
If the paper in a drawer is specified as special paper, the paper in that drawer is not automatically selected
with the Paper setting "Auto Paper". This function is useful if special paper is loaded into a paper drawer.
For more details, refer to "To set the "Specialty Paper" function" of the Administrator Operations volume.
3-18
3.5 Loading Paper
Konica 8020/8031