Rear Drive Removal/Inspection/Installation - KYMCO 2006 MXU 500 Off-Road Owner's Manual

13
. DRIVE TRAIN
REAR DRIVE
REMOVAL/INSPECTION/
INSTALLATION
REMOVAL
Remove the left rear axle housing (refer to
the "REAR AXLE HOUSING
REMOVAL/INSPECTION/
INSTALLATION" section in the chapter
15).
Remove the four mounting nuts from the
right rear axle housing.
Remove the rear drive assembly and rear
propeller shaft together.
Remove the rear propeller shaft from the
rear drive assembly.
＊
Do not lose the compression spring.
Rear Propeller Shaft
Rear Drive Assembly
Rear Propeller Shaft
Compression Spring
MXU 500
13-36