KYMCO 2006 MXU 500 Off-Road Owner's Manual page 464

13
. DRIVE TRAIN
Remove the snap ring.
Remove the bearing by using the special
tool.
Special tool:
Yoke bearing puller
＊
If there is no abnormal condition, the
bearing removal is not necessary
The removed bearing must be replaced
with a new one.
Remove the shifting sleeve.
Remove the snap ring.
Remove the pinion gear together with the
bearing.
A120F00018
Snap Ring Bearing
Shifting Sleeve
Snap Ring
MXU 500
Pinion Gear/Bearing
13-18