KYMCO 2006 MXU 500 Off-Road Owner's Manual page 266

3
. INSPECTION/ADJUSTMENT
FRONT SHOCK ABSORBER
＊
Always adjust both front shock absorber
spring preload to the same setting.
Uneven adjustment can cause poor
handling and loss of stability.
Adjustment
Turn the adjuster to increase or decrease the
spring preload.
Standard position: 2
Minimum (Soft) position: 1
Maximum (Hard) position: 5
REAR SHOCK ABSORBER
＊
Always adjust both rear shock absorber
spring preload to the same setting.
Uneven adjustment can cause poor
handling and loss of stability.
Adjustment
Turn the adjuster to increase or decrease the
spring preload.
Standard position: 2
Minimum (Soft) position: 1
Maximum (Hard) position: 5
DRIVE SELECT LEVER
ADJUSTMENT
1. Turn the ignition switch is ON and make
sure the engine stop.
2. Remove 3 fasteners (1), then remove the
left side cover (2).
3-27
MXU 500