KYMCO 2006 MXU 500 Off-Road Owner's Manual page 409

10. DRIVE PULLEY/DRIVEN PULLEY/CLUTCH
Apply lightweight lithium-soap base grease
to the new oil seal lip, then install the new
oil seal.
Install the clutch housing.
One-way clutch bearing installation:
Install the one-way clutch bearing into the
clutch housing.
＊
The one-way clutch bearing should be
installed in the clutch carrier assembly
with the arrow mark and "OUT SIDE"
mark facing toward the clutch carrier
assembly.
Oil Seal
MXU 500
Clutch Housing
10-26