KYMCO 2006 MXU 500 Off-Road Owner's Manual page 584

16
. BRAKE SYSTEM
7. Fill the brake reservoir (front brake lever)
with brake fluid.
8. Loosen the delay valve bleed valve nut.
Connect the transparent hose to the bleed
valve.
Use the syringe to draw brake fluid into
it until there is no air bubbles in the
transparent hose.
Then, tighten the bleed valve nut.
Torque: 0.6 kgf-m (6 Nm, 4.32 lbf-ft)
＊
When drawing brake fluid with the
syringe, the brake fluid level should be
kept over 1/2 of the brake reservoir
height (front brake lever).
Use only the recommended brake fluid.
Recommended Brake Fluid: DOT-4
9. Fill the brake reservoir (brake pedal)
with brake fluid.
16-19
Reservoir
Reservoir
MXU 500
Bleed Valve