KYMCO 2006 MXU 500 Off-Road Owner's Manual page 28

(3) Coolant temperature warning indicator
When the coolant temperature reaches a
specified level, this indicator comes on to
warn that the coolant temperature is too hot.
If the indicator comes on during operation,
stop the engine as soon as it is safe to do so
and allow the engine to cool down for about
10 minutes.
(4) Set button
This button is used to select ODO, TRIP A
and TRIP B.
This button is also used to adjust the time
and reset the tripmeter.
(5) Low-range indicator light "L"
This indicator light comes on when the drive
select lever is in the "L" position.
(6) High-range indicator light "H"
This indicator light comes on when the drive
select lever is in the "H" position.
(7) Neutral indicator light "N"
This indicator light comes on when the drive
select lever is in the "N" position.
(8) Reverse indicator light "R"
This indicator light comes on when the drive
select lever is in the "R" position.
(9) Park indicator light "P"
This indicator light comes on when the drive
select lever is in the "P" (park) position.
(10) Mode button
This button is used to select km/h, mph, km
and mile.
This button is also used to adjust the time
and reset the tripmeter.
18