Rear Propeller Shaft Disassembly/Inspection; Assembly - KYMCO 2006 MXU 500 Off-Road Owner's Manual

13
. DRIVE TRAIN
REAR PROPELLER SHAFT
DISASSEMBLY/INSPECTION/

ASSEMBLY

DISASSEMBLY
Remove the front propeller shaft (refer to
the "REAR DRIVE
REMOVAL/INSPECTION/
INSTALLATION" section in this chapter).
Slide the spring ring back, then remove the
boot.
Remove the snap rings from the universal
joint.
13-61
Spring
Snap Ring
MXU 500
Boot