KYMCO 2006 MXU 500 Off-Road Owner's Manual page 561

15.
REAR WHEEL/AXLE/SHOCK
ABSORBER/SWING ARM
INSTALLATION
Install the right pivot bolt and the left pivot
adjusting bolt.
Tighten the right pivot bolt to the specified
torque.
Actual: 11.8 kgf-m (118 N-m, 85 lbf-ft)
Tighten the left pivot adjusting bolt to the
specified torque.
Torque: 1.1 kgf-m (11 N-m, 8 lbf-ft)
Move the swing arm up and down several
times to seat the pivot bearings.
Retighten the pivot bolts to the same torque.
Install the left pivot lock nut.
Tighten the lock nut while holding the left
pivot adjusting bolt to the specified torque.
Special tool:
Lock nut wrench
Torque:
Actual: 11.8 kgf-m (118 N-m, 85 lbf-ft)
Special tool indicated:
10.5 kgf-m (105 N-m, 76 lbf-ft)
Install the brake fluid hose band and tighten
the bolt securely.
Install the pivot bolt caps.
A120F00013
Lock Nut Wrench
MXU 500
15-16