KYMCO 2006 MXU 500 Off-Road Owner's Manual page 465

13
. DRIVE TRAIN
Pull the pinion bearing from the shaft with a
commercially available bearing puller.
＊
If there is no abnormal condition, the
bearing removal is not necessary
The removed bearing must be replaced
with a new one.
Remove the pinion gear pilot bearing by
using the special tools.
Special tool:
Bearing puller A120E00037
＊
If there is no abnormal condition, the
bearing removal is not necessary
The removed bearing must be replaced
with a new one.
Remove the C-rings from the universal joint
by using the special tool.
＊
Replace the removed C-ring with a new
one.
Special tool:
C-ring remover A120F00022
13-19
Bearing
Bearing
MXU 500