14.
FRONT WHEEL/FRONT SUSPENSION/
STEERING SYSTEM
Replace the bearing by using the special
tool.
Special tool:
Oil seal and bearing driver
INSPECTION
Inspect the steering column.
Bends/damage
*
Do not attempt to straighten a bent
steering column, this may dangerously
weaken the steering column.
Inspect the steering brackets and oil seal.
Wear damage
Replace.
INSTALLATION
*
Apply the grease onto the collar, dust
seals, and bearing.
Install the steering column and collar, then
tighten the nut under the frame body.
Torque: 7 kgf-m (70 N-m, 50 lbf-ft)
Install the cotter pin and band ends of cotter
pin.
*
Always use a new cotter pin.
A120E00014
Replace.
Bearing Driver
Bearing Driver
MXU 500
14-32