Front Drive Shaft Disassembly/Inspection/ Assembly - KYMCO 2006 MXU 500 Off-Road Owner's Manual

13
. DRIVE TRAIN
FRONT DRIVE SHAFT
DISASSEMBLY/INSPECTION/
ASSEMBLY
DISASSEMBLY
Remove the front drive shaft (refer to the
"FRONT DRIVE SHAFT
REOMVAL/INSPECTION/
INSTALLATION" section in this chapter)
Remove the boot band of the case side joint.
Slide the boot toward the center of the front
drive shaft and remove the circlip from the
case side joint.
Separate the case side joint from the front
drive shaft.
13-5
Case Side Joint
MXU 500
Band
Circlip