KYMCO 2006 MXU 500 Off-Road Owner's Manual page 407

10. DRIVE PULLEY/DRIVEN PULLEY/CLUTCH
MXU 500
Check operation (not USA type):
Install the one-way clutch bearing and
clutch carrier assembly to the clutch
housing and hold the clutch carrier
assembly.
When turning the clutch housing clockwise,
the clutch housing should turn freely. If not,
the one-way clutch assembly is faulty.
Replace it.
When turning the clutch housing
counterclockwise, the clutch hosing and
crankshaft should be engaged. If not, the
one-way clutch assembly is faulty. Replace
it.
Check operation (USA type):
Install the one-way clutch bearing and collar
to the clutch housing and hold the collar.
When turning the clutch housing clockwise,
the clutch housing should turn freely. If not,
the one-way clutch assembly is faulty.
Replace it.
When turning the clutch housing
counterclockwise, the clutch hosing and
crankshaft should be engaged. If not, the
one-way clutch assembly is faulty. Replace
it.
Needle Bearing
Install the clutch housing to the crankshaft.
When turning the clutch housing clockwise
or counterclockwise, the clutch housing
should turn smoothly. If not, the needle
bearing or the clutch housing is damage,
then replace the clutch housing.
Clutch Housing
10-24