Rear Swing Arm Disassembly/Inspection; Assembly - KYMCO 2006 MXU 500 Off-Road Owner's Manual

15.
REAR WHEEL/AXLE/SHOCK
ABSORBER/SWING ARM
REAR SWING ARM
DISASSEMBLY/INSPECTION/

ASSEMBLY

DISASSEMBLY/INSPECTION
Remove the three bolts and then remove the
skid plate from swing arm.
Inspect the skid plate for damage.
If any damages are found, replace the skid
plate with a new one.
Inspect the swing arm for distortion or
damage.
If any damage are found, replace the swing
arm with a new one.
Inspect the dust seals for wear or damage.
If any damages are found, replace them with
new ones.
Remove the dust seals.
15-17
Rear Swing Arm
Dust Seal
MXU 500
Skid Plate
Dust Seal