KYMCO 2006 MXU 500 Off-Road Owner's Manual page 245

3
. INSPECTION/ADJUSTMENT
3. Loosen the screw (3) and remove the air
cleaner assembly (4) from the air cleaner
housing.
4. Unscrew the clamp (5)
5. Remove the outer air cleaner (7).
6. Remove the screw/washers (6) and
remove the air cleaner assembly from the
air cleaner holder (8).
7. Remove the inner air cleaner (9) and air
cleaner screen (10) from the air cleaner
guide (11).
8. Remove the air cleaner screen from the
inner air cleaner.
CLEAN AIR FILTER ELEMENT
Wash the element gently, but throughly in
solvent.
＊
Use parts cleaning solvent only. Never
use gasoline or low flash point solvents
which may lead to a fire or explosion.
Squeeze the excess solvent out of the
element and let dry.
＊
Do not twist or wring out the foam
element. This could damage the foam
material.
Apply the engine oil.
Squeeze out the excess oil.
＊
The element should be wet but not
dripping.
More frequent replacement is required when
riding in unusually dusty or rainy areas.
(7) (8) (9) (10)
MXU 500
(11)
3-6