KYMCO 2006 MXU 500 Off-Road Owner's Manual page 489

13
. DRIVE TRAIN
Remove the oil seal.
＊
If there is no abnormal condition, the
oil seal removal is not necessary
The removed oil seal must be replaced
with a new one.
Remove the bearing lock nut by using
special tool.
Special tool:
Bearing lock nut wrench A120F00020
Install the special tool onto the pinion gear
shaft and gear case.
Special tool:
Pinion puller set A120F00021
Pull the pinion assembly out from the case.
13-43
Oil Seal
Bearing Lock Nut
MXU 500