Front And Rear Brake Shoe Inspection; Brake Fluid Inspection(Disk Brake) - KYMCO MX'er 150 Driver Manual

Front and rear brake shoe inspection

A wear indicator is provided on each brake. The
indicators allows checking of brake shoe wear
without disassembling the brake. Apply the
brake and check the position of the indicator. If
the indicator reaches the wear limit line, ask a
KYMCO dealer to replace the shoes as a set.
1. Wear indicator
1. Wear limit
2. Wear limit
101

Brake fluid inspection(Disk brake)

Add recommended brake fluid DOT4 into the
tank until the fluid level reaches the upper limit if
the fluid level reaches the lower limit or replace
every year and do not mix brake fluid of different
brands.
(MX'er 150/125)
1. Upper limit
(MX'er 50)
1. Lower limit
UPPER
LOWER
2. Lower limit