KYMCO 2006 MXU 500 Off-Road Owner's Manual page 402

10. DRIVE PULLEY/DRIVEN PULLEY/CLUTCH
INSTALLATION
Apply clean engine oil to the clutch carrier
assembly and collar, then install the collar
and clutch carrier assembly.
Install the washer (Not USA type).
Install the collar (USA type).
Use the special tools to install and tighten
the nut to the specified torque.
Torque: 14 kgf-m (140 N-m, 100.8 lbf-ft)
Special tool:
Y-type holder
Lock nut wrench (Not USA type)
Stake the nut with a center punch.
10-19
A120E00056
A120F00067
Collar
Clutch Carrier Assembly
(Not USA type: Washer)
(USA type: Collar)
MXU 500
Nut