Assembly - KYMCO 2006 MXU 500 Off-Road Owner's Manual

16
. BRAKE SYSTEM

ASSEMBLY

＊
Wash the master cylinder components
with new brake fluid before
reassembly.
Do not wipe the brake fluid off with a
rag after washing the components.
When washing the components, use
the specified brake fluid (DOT 4).
Never use different types of fluid or
cleaning solvents such as gasoline,
kerosine, etc.
Apply brake fluid to the master
cylinder bore and all the component to
be inserted to be inserted to the bore.
Front/rear brake master cylinder
Install the spring/piston.
Install the snap ring.
Install a new dust boot.
Brake pedal master cylinder
Install the spring/piston.
Install the snap ring.
Install a new dust boot.
Install a new O-ring.
Install the fluid duct.
Install the snap ring.
Fluid Duct Snap Ring
Spring Piston
MXU 500
Dust Boot
Snap Ring
16-30