Set Pppoa Mac - NetComm IP DSLAM NCT480 User Manual

Set PPPoA MAC

The PPPoA MAC address to be used in the PPPoE packets from DSLAM to the BRAS is configurable. One
MAC address can be assigned to multiple PPPoA terminations. The PPPoE session identifier is additionally
used to perform the de-multiplexing in the BRAS to customer direction.
Item
PPPoA MAC
NCT480 IP DSLAM User Guide
68
Figure 4- Set PPPoA MAC Dialog
Description
Configure the MAC address to be used by the PPPoE tunnel interface.
Table 4-8 Add PPPoA MAC
YML856 Rev3
www.netcomm.com.au