Chapter 2 Product Overview; Introduction To The Nct480 - NetComm IP DSLAM NCT480 User Manual

ChAPTeR 2
This chapter provides an overview of the NCT480 IP-DSALM (Digital Subscriber line Access Multiplexer) and
the service application overview. This chapter contains the following sections:
•

Introduction to the NCT480

• NCT480 System Overview
• System Management
Introduction to the NCT480
NCT480 mini IP-DSLAM is a revolutionary product with capabilities to interface directly with evolving IP
network in a cost effective manner. The Gigabit Ethernet Network uplink interfaces on the NCT480 IP-DSLAM
can directly connect to an Internet router or LAN Switch.
The NCT480 comes in compact size (1 U high) and can be used as desktop unit or can be mounted on the rack.
It can be fitted on rack with 19 inches in width and 23 inches in depth through the optional rack mount-kit.
The NCT480 is an advanced IP based DSLAM that can be used by service providers to offer broadband multi-
service features on the last mile access network on copper based local loop, it offers ADSL, ADSL2, and ADSL2+
interfaces and delivers advanced IP services that include QoS, multicast, subscriber management. These service
features prevent clogging and congestion of the bandwidth available to the users allowing smooth, easy and
efficient passage of video, voice and data packets across the networks, which also enables operators to increase
their revenues and maximize their profits manifold.
The feature rich design make NCT480 the most economical and suitable solution for next generation
broadband access platforms. It provides among other advantages easy maintenance and easy installation,
which in turn reduces operating cost and network down time to the service providers.
The NCT480 has 48 ADSL Subscriber ports and Network uplink interfaces consists of 2 pairs of Gigabit
Ethernet and mini-BGIC. Using various uplink settings, it is possible to stack the NCT480 units and aggregate
multiple units over a common network connection.
NCT480 mini IP DSLAM has a web interface for system management. Remote administration, remote
firmware upgrade, system configuration, fault and performance management, system diagnostics and
subscriber loop tests can all be performed be the web management interface of the NCT480 IP DSLAM.
Please refer to the Web Management Operation Guide in this user manual for further information.
NCT480 IP DSLAM User Guide
6
PRODUCT OveRvIeW
YML856 Rev3
www.netcomm.com.au