Commit and Reboot
The commit and reboot configuration dialog allows you to commit, reboot or restore factory configuration
the system.
Commit Configuration
Commit the system to save all configuration information from NVRAM to Flash, all variables change without
commit will be lost due to system (hardware) reboot or power-off.
Commit action takes around 20 seconds to accomplish.
Reboot System
Reboot system (restart) takes around 90 seconds to accomplish.
YML856 Rev3
www.netcomm.com.au
Figure - Commit & Reboot Configuration Dialog
Figure -10 System Commit
Figure -11 System Reboot
NCT480 IP DSLAM User Guide
NCT480 IP DSLAM User Guide
4