Chapter 5 - Access Control; Mac Limit - NetComm IP DSLAM NCT480 User Manual

ChAPTeR 5
The access control functionalities allow system administrator to build packet filter and access control list.
This chapter contains the following sections:
•

MAC Limit

• Port ACL
• Global ACL
MAC Limit
Limit MAC number control the total number of MAC addresses learning from independent port interface
(Ethernet and ADSL).
Item
Port selection menu
Limit MAC number
Selected port's MAC number
NCT480 IP DSLAM User Guide
6
ACCeSS CONTROL
Figure 5-1 MAC Limit Dialog
Description
This specifies the Ethernet interface and ADSL port interface.
The number of MAC addresses that can be learned by the specific port interface.
Ethernet valid values: 1 ~ 256
DSL valid values: 1 ~ 16
This displays the selected port's limit MAC number.
Table 5-1 Configuring the MAC Limit
YML856 Rev3
www.netcomm.com.au