NetComm IP DSLAM NCT480 User Manual page 65

Table 4-6 describes the column status of PVC setting.
Column Item
Port
vPI
vCI
encapsulation type
YML856 Rev3
www.netcomm.com.au
Figure 4- PVC Setting Dialog
Description
This indicates the physical DSL port interface.
The virtual path identifier of correspond DSL port interface.
The virtual circuit identifier of correspond DSL port interface.
This specifies the data multiplexing method to be used over the AAL5 layer. Adjacent
CPE must use the same encapsulation to establish the connection.
Possible choice: LLCMux* or VCMux*.
* LLC encapsulation enables one Virtual Channel to carry multiple protocols with each
packet header containing protocol identifying information. VC encapsulation engages
each protocol with a specific virtual channel.
Table 4-6 Monitoring the PVC Management
NCT480 IP DSLAM User Guide NCT480 IP DSLAM User Guide
65