Set Password; Backup Setting - NetComm NP2500 User Manual

24-port 10/100 poe + 2-port 10/100/1000 websmart switch

Hide thumbs Also See for NP2500:

Table of Contents

Set Password

Password is the invaluable tool for the manager to secure the Web Management Switch. You can use this

function to change the password.

If you forget the password, press the "Reset" button in the rear panel of the Switch. The current setting

includes VLAN, Port Setting... etc. will be lost and the Switch will be restored to the default setting.

Figure 33.Set Password

The backup tools help you to backup the current setting of the Switch. Once you need to backup the setting,

press the "Backup" button to save the setting.

To restore a current setting ﬁle to the device, you must specify the backup ﬁle and press the "Restore" button

to process the setting of the recorded ﬁle.

Figure 34. Backup Setting

Note: When restoring a recorded ﬁle, the current password will not be erased.

NP2500 24-Port 10/100 PoE + 2-Port 10/100/1000 WebSMART Switch User Guide

YML842 Rev1

Table of Contents