Chapter 5 - System Specifications; Hardware Specification - NetComm IP DSLAM NCT480 User Manual

ChAPTeR 5
The chapter provides the detail descriptions of technical specification of NCT480 in hardware and software,
respectively. This chapter contains the following sections:
•

Hardware Specification

• Software Specification
hardware Specification
This section shows the system hardware specification of the NCT480 mini IP-DSLAM.
Table 5-1 lists the hardware specifications of NCT480 system.
Specification
Dimensions
Weight
Console interface Management
access
Power requirements
Front Panel Interfaces
ADSL Subscriber interface
ADSL Standards support
ATM Protocol
NCT480 IP DSLAM User Guide
30
SySTeM SPeCIfICATIONS
Description
2" x 19" or 23" x 11" (H x W x D)
With Splitter: 4 Kg
RJ-45 to RS-232 Female DB-9 adaptor cable
Gigabit Ethernet out-band management
85Walt; -36VDC ~ -60VDC; ~2 Amp.
2 x RJ-45 Gigabit Ethernet interface (10/100/1000 Base-T)
2 x mini-GBIC Optical interface (Alternative)
1 x 10/100 Base-T Management Port
1 x RS-232 Console Port
1 x Alarm I/O socket
2 x Telco-50P Female connectors for POTS
2x Telco-50P Female conenctors for Lines
Dual DC power source terminal
48 ports
ANSI T1.413
ITU-T G.992.1, (G.dmt) Annex A
ITU-T G.992.2, (G.lite) Annex A
ITU-T G.992.3 (ADSL2) Annex A, AnnexL
ITU-T G.992.5 (ADSL2+) Annex A, AnnexM
Ethernet over ATM (RFC 1483 bridge)
IPoA (RFC 1483 route)
PPPoA (RFC 2364)
PPPoE (RFC 2516)
YML856 Rev3
www.netcomm.com.au