User And Password - NetComm IP DSLAM NCT480 User Manual

User and Password

The User and Password Dialog window displays information of all the users. Password is hidden in '*'.
Click 'Add' button to create a new user.
Two users can be adding to a single NCT480 IP-DSLAM.
The 'super user' owns full privilege while 'user' has only monitoring privilege.
Item
User Name
Password
Privilege
NCT480 IP DSLAM User Guide
4
Figure -3 User & Password Dialog
Figure -4 Add New User Dialog
Description
This specifies the user name to be created.
Valid values: String of up to 20 characters ('A' – 'Z', 'a' – 'z', '0' – '9', '-', '_') and any
combination of printable characters excluding ';'.
This specifies the password required by this user to login to the unit.
Valid values: String of up to 20 characters ('A' – 'Z', 'a' – 'z', '0' – '9', '-', '_') and any
combination of printable characters excluding ';'.
This indicates the privilege level of the user.
super user – Owns show, add, delete and modify privilege.
user – Owns show privilege only.
Table -3 Configuring the Add New User
YML856 Rev3
www.netcomm.com.au