Service Applications - NetComm IP DSLAM NCT480 User Manual

Service Applications

This section describes various usages of NCT480 mini IP-DSLAM.
Uplink Aggregation
The NCT480 supports Network uplink aggregation complied in IEEE 802.3ad standard, this allow operator to
configure both of NCT480 GE uplink interfaces in a single logical interface to extending the bandwidth transmission.
Stacking Application
The NCT480 supports stacking in maximum of 4 units together via GE uplink interface, all units will share a
single source.
YML856 Rev3
www.netcomm.com.au
NCT480 IP-DSLAM
Figure -3 NCT480 Link Aggregation Illustrate
NCT480 IP-DSLAM with
Ge Stacking
Figure -4 NCT480 Stacking Illustrate
NCT480 IP DSLAM User Guide NCT480 IP DSLAM User Guide