Chapter 6 - Protocol Menu; Vlan Port - NetComm IP DSLAM NCT480 User Manual

ChAPTeR 6
Protocol menu contains setting for VLAN, IGMP, DHCP/PPPoE relay configuration and Rapid Spanning Tree
Protocol.
This chapter contains the following sections:
•

VLAN Port

• Trunk VLAN Setting
• IGMP Snooping
• DHCP & PPPoE Relay
• Spanning Tree Protocol
• Rapid Spanning Tree Protocol
vLAN Port
The VLAN port management allows you to control the accept frame type and ingress filtering status of port
interface.
Item
Accept frames Type
Ingress filtering
Default vLAN ID
YML856 Rev3
www.netcomm.com.au
PROTOCOL MeNU
Figure 6-1 VLAN Ports Management Dialog
Description
The set of ports, which are transmitting traffic for this VLAN, as either tagged or
untagged frames.
When this is Tagged, the device will discard untagged frames or priority-Tagged frames
received on this port. When All, untagged frames or Priority-Tagged frames received on
this port will be accepted and assigned to the PVID for this port.
When this is true, the device will discard incoming frames for VLANs, which do not
include this Port in its Member set. When false, the port will accept all incoming
frames.
The VLAND ID to be assigned if untagged frames are accepted.
Press the 'Apply' button to confirm the setting.
Table 6-1 VLAN Ports Management Dialog Description
NCT480 IP DSLAM User Guide NCT480 IP DSLAM User Guide