Connecting The Rj-45 Network Uplink Interface - NetComm IP DSLAM NCT480 User Manual

Connecting the RJ-45 Network Uplink Interface

Complete the following steps to connect the RJ-45 network uplink.
To ensure the 1000 Base-T performance, please using the standard Category 5, 6,  Ethernet UTP cable.
1 Connect one end of the RJ-45 to the "Gige 1" or "Gige 2" port on the NCT480 front panel.
2 Connect the other end of RJ-45 to the Layer 2 / Layer 3 switch router of provider's
IP network.
YML856 Rev3
www.netcomm.com.au
Figure 4-5 Front Panel RJ-45 Network Uplink Cabling for NCT480
Figure 4-6 Front Panel mini-GBIC Network Uplink Cabling for NCT480
NCT480 IP DSLAM User Guide NCT480 IP DSLAM User Guide