Snmp Host - NetComm IP DSLAM NCT480 User Manual

SNMP host

The SNMP Host configuration dialog allows you to manage the Host IP and corresponded SNMP community.
Click 'Add' button to create a new SNMP Host IP address.
The Host IP is the device (PC) IP address allowed to manage the IP-DSLAM via AMS (Advanced Management
Service). It is recommended to limit the number of host device.
Table 4-11 describes fields in the Add Host IP Address Dialog.
Item
IP Address
Community
Access
YML856 Rev3
www.netcomm.com.au
Figure 4-14 SNMP Host Configuration Dialog
Figure 4-15 Add Host IP Address Dialog
Description
This specifies the IP address of the manager that has access permissions.
Valid values: Any valid class A/B/C address
This indicates the community name specify on community configuration.
This indicates the access permissions given to managers with this community name.
Table 4-11 Configure Host IP
NCT480 IP DSLAM User Guide NCT480 IP DSLAM User Guide
3