Tools And Equipment Required - NetComm IP DSLAM NCT480 User Manual

Tools and equipment Required

The Table 3-3 lists the tools and equipment you need to install and remove the NCT480 system components.
Check
hardware Components
Software Components
Tools
YML856 Rev3
www.netcomm.com.au
Tools and equipment
NCT480 System
DC Power Supply
RJ-45 to DB-9 RS232 Console Cable
RJ-21 DSLAM Cables
LCT DSLAM Management Utility
(Only Applicable to NCT480 running firmware R1.43 or older; NCT480 running R2.0 or
newer uses web management interface for system management.)
A 3/16 inch flat-head screwdriver
A Phillips-head screwdriver
Necessary equipment for ESD protection
Mounting screw – To mount the NCT480 system to the rack
Tie wraps
Table 3-3 Installation Tools Lists
NCT480 IP DSLAM User Guide NCT480 IP DSLAM User Guide
1