Dsl Profile Mapping - NetComm IP DSLAM NCT480 User Manual

DSL Profile Mapping

This section helps you to attach the DSL profile to the ADSL line interface.
Table 4-4 shows the default parameter values if the DSL profile is 'NONE'.
Item
from
To
Profile Name
Item
Line Interface
Standard type
AnnexM
Line Type
Rate Mode
SNR Margin (ATUC/ATUR)
Target SNR Margin (db/10)
Minimum SNR Margin (db/10)
Maximum SNR Margin (db/10)
Tx Rate and Delay (ATUC/ATUR)
Minimum Tx Rate (Kbps)
Maximum Tx Rate (Kbps)
YML856 Rev3
www.netcomm.com.au
Figure 4-4 DSL Profile Mapping Dialog
Description
This specifies the starting ADSL port interface for ATM PVC configuration.
This specifies the ending ADSL port interface for ATM PVC configuration.
This specifies the profile name. (DSL Profile)
Table 4-3 DSL Profile Mapping
Setting
ADSL2Plus
off
interleave
adaptAtStartup
60
0
310
64
ATUC: 28000
ATUR: 1088
NCT480 IP DSLAM User Guide NCT480 IP DSLAM User Guide
5