Chapter 4 - Deployment Menu; Dsl Port - NetComm IP DSLAM NCT480 User Manual

ChAPTeR 4
The deployment menu contains DSL profile, physical interface setting, network Ethernet and ADSL port.
This chapter contains the following sections:
•

DSL Port

• DSL Profile Configuration
• DSL Profile Mapping
• DSL Alarm Profile
• Power Management Mode
• PVC Setting
• Route Setting
• Ethernet Setting
• SNMP Host
• SNMP Community
DSL Port
This section describes how to enable and disable port through Enable/disable dialog.
Item
Port selection pull down menu
Admin status
YML856 Rev3
www.netcomm.com.au
DePLOyMeNT MeNU
Figure 4-1 DSL Port Configuration Dialog
Table 4-1 Enable / Disable port
Description
Select port to be enabled or disabled
Display port status
NCT480 IP DSLAM User Guide NCT480 IP DSLAM User Guide
55