Cabling; Rack Mounting - NetComm IP DSLAM NCT480 User Manual

Cabling

For detailed information on the required cables, refer to "Appendix System Connector Pin-Outs".
NCT480 Cabling
The Figure 2-2 illustrates the NCT480 system cabling.

Rack Mounting

Mount your NCT480 system in a rack is highly recommend. Ensure that vertical rivet spacing on the rack rails
meets standard EIA-310-C or ETS300 requirements.
NCT480 fits into a 19 inch wide rack or an ETSI 600 mm wide (23 inch) cabinet by replacing the ear bracket.
NCT480 IP DSLAM User Guide
0
Figure 3- NCT480 Cabling Diagram
Figure 3-3 NCT480 Mounting Diagram.
YML856 Rev3
www.netcomm.com.au