Firmware Upgrade - NetComm IP DSLAM NCT480 User Manual

firmware Upgrade

The upload process uses HTTP (Hypertext Transfer Protocol) and may take up to three minutes.
After a successful upload, the system must reboot.
The following table describes the labels in this screen.
The NCT480 web management Firmware Upgrade file name must be "TEImage.bin.gz".
Item
Browse...
Upgrade
Clear
NCT480 IP DSLAM User Guide
46
Figure -8 Firmware Upgrade Dialog
Table -5 Firmware Upgrade Description
Description
Type in the location of the file you want to upload in this field or click Browse... to find
the ".bin.gz" file.
Click this to begin the upgrade process. This process may take up to three minutes.
Click this to clear the location of the file in this field.
YML856 Rev3
www.netcomm.com.au