Ethernet Statistics - NetComm IP DSLAM NCT480 User Manual

ethernet Statistics

The Ethernet interface statistics allows you to check the packets information of selected Ethernet port.
Item
ethernet port selection menu
Physical address
Unknown Protocol Packets
In Octets
Out Octets
In Discards
Out Discards
In errors
Out errors
In Unicast Packets
Out Unicast Packets
In Multicast Packets
Out Multicast Packets
In Broadcast Packets
Out Broadcast Packets
NCT480 IP DSLAM User Guide
5
Figure 3-3 Ethernet Statistics Dialog
Description
Select the Ethernet interface to display relative parameters.
The MAC address used by this Ethernet interface, when it must be referred to, in a
unique fashion.
The number of packets received by the interface, which were discarded because of an
unknown or unsupported protocol.
The total number of octets received on the interface, including the framing characters.
For Ethernet interface, this will have the lower 32 bits of HC in octets.
The total number of octets transmitted out the interface, including the framing
characters. For Ethernet interface, this will have the lower 32 bits of HC out octets.
The number of inbound packets, which were discarded, though no errors were
detected.
The number of outbound packets chosen to be discarded even though there were no
errors.
The number of inbound packets, which were not delivered to upper layers because of
errors.
The number of outbound packets to be discarded because there were errors.
The number of unicast packets delivered to a higher layer protocol.
The number of packets requested to be sent to unicast addresses, by upper layer
protocol.
The number of multicast packets delivered to a higher layer protocol.
The number of packets requested to be sent to multicast addresses, by upper layer
protocol.
The number of broadcast packets delivered to a higher layer protocol.
The number of packets requested to be sent to broadcast addresses, by upper layer
protocol.
Table 3-3 Ethernet Statistics Dialog Description
YML856 Rev3
www.netcomm.com.au