Restore Factory Configuration - NetComm IP DSLAM NCT480 User Manual

Restore factory Configuration

Use restore factory configuration to restore configuration parameters of factory default values.
The restore factory default parameters are list in Table 2-6.
Item
ADSL Layer
vPCI (vPI/vCI)
encapsulation
Standard
Bridge Layer and ethernet IP
Bridge mode
ethernet port 1 IP address
ethernet port 2 IP address
ethernet port 3 IP address
Management
SNMP community
Web Management Username /
Password
CLI Username / Password
Telnet Username / Password
NCT480 IP DSLAM User Guide
48
Figure -1 Restore Factory Configuration
Description
8/35 for each ADSL port interface.
LLCMUX
ADSL2+ Auto
Restricted bridge mode
0.0.0.0 / 0.0.0.0, Uplink
0.0.0.0 / 0.0.0.0, Downlink
192.168.1.1 / 255.255.255.0, management port
public (re-write privilege)
admin / admin
admin / admin
admin / admin
Table -6 NCT480 System Factory Default Parameters
YML856 Rev3
www.netcomm.com.au