NEC UNIVERGE NEAX 2000 IPS Reference Manual page 163

Direct Inward System Access (DISA)
This feature allows an outside caller to access
the system using an exchange network
connection without Attendant or station
assistance. The outside user may originate
calls over any or all of the system's facilities
such as WATS, FX, Tie Line or CCSA. The
outside user can also directly call stations and
access miscellaneous trunks for such features
as dictation access.
Call Forwarding Set by DISA
This feature allows an outside caller to set Call
Forwarding - All Calls by using Direct Inward
System Access (DISA) code.
Direct Inward Termination (DIT)
This feature automatically routes incoming
network exchange calls directly to a pre-
selected station without Attendant assistance.
The call can then be processed by the called
party. Three-party Conference, Call Transfer,
etc., are handled in the same manner as any
normal trunk call.
Direct Outward Dialing (DOD)
This feature permits any station user the
ability to gain access to the exchange network
by dialing an access code and receiving new
dial tone. The user may then proceed to dial
the desired exchange network number.
UNIVERGE 2000 IPS Request for Proposal (RFP) Reference Guide
NEAX
Issue 6
Direct Station Selection/Busy Lamp Field
(DSS/BLF) Console
This feature allows a DCU-60-1 unit
associated with a legacy Multiline Terminal to
be used as a Direct Station Selection/Busy
Lamp Field (DSS/BLF) Console. When the
buttons on the DCU-60-1 unit are
programmed for Direct Station Selection
(DSS) buttons, up to 60 stations can be
directly accessed in addition to those already
appearing on the Multiline Terminal. Busy
status for each station is indicated by a red
LED associated with each button. In addition,
the DSS console can provide the following
functions:
• Message Waiting - Set/Cancel/Status
Display
• Do Not Disturb - Set/Cancel/Status
Display
• Automatic Wake Up No Answer - Status
Display/Cancel
• Agent Busy Out - UCD - Status Display
• Line Lockout - Status Display
• Room Cutoff - Set/Cancel/Status
Busy Out Status Console
This feature allows a DCU-60-1 unit associated
with a Multiline Terminal to be used as a Busy Out
Status Console. This feature is activated by use of
a Function Mode key on a DSS/BLF Console.
Busy Out Status for each station is indicated by a
red LED associated with each button.
Do Not Disturb Console
This feature allows a DCU-60-1 unit associated
with a Multiline Terminal to be used as a Do Not
Disturb (DND) Console. This feature is activated
by the use of a Function Mode key on a DSS/BLF
Console. DND set status for each station is
indicated by a green LED associated with each
button. In addition, the Multiline Terminal user can
set/cancel the DND status of other stations using
the DND Console.
Chapter 9 Descriptions
Page 9- 17