NEC UNIVERGE NEAX 2000 IPS Reference Manual page 38

Chapter 2 System Architecture
Cabling
The internal and external cabling for the
Internal Cabling
BUS Cable
The BUS Cable provides a connection between PIM's for I/O Bus, PCM Bus, and Alarm Bus extension
in a multiple-PIM configuration.
Name Code
48-TW-0.7 CONN CA
Power Control Cable
The Power Control Cable provides a connection between the MP and the AC/DC Power Supply for
controlling battery backup function and MJ/MN alarm indication.
Name Code
PWR CNT CA-D
PWR CNT CA-E
DC Power Cable
The DC Power Cable provides a connection between the AC/DC Power Supplies for extending the 27
VDC input in a multiple-PIM configuration, when battery backup option is required
Power Cable (Internal Battery Option)
Name Code
PWR CA-A
BATT CA INT
Power Cable (External Battery Option)
Name Code
PWR CA-A
BATT CA EXT
AC Cord
The AC cord provides a connection between the AC/DC Power Card and Base Unit.
Name Code
AC CORD-B-U
AC CORD-D-U
Page 2- 8
U
NIVERGE
Bus Cable
Qty
(No. of PIM)-1
Power Control Cable
Qty
1/PIM Power control cable (for PIMI-PIM7):
BWB - PZ-PW121/122 (Included in
PIM)
1/PIM Power control cable (for PIM0)
BWB - PZ-PW121/122 (Included in
Base and PIM for Dual System)
Qty
1/2 PIM DC Power Cable (-27v input)
1/PIM Internal Battery Cable
Qty
(No. of PIM) –1= up to 4PIM
(No. of PIM) –2= 5 to 8PIM
1/Stack
AC Cord
Qty
1/PIM AC power cable (Included in PIM)
1/BASE AC power cable for BASE (Included in BASE)
UNIVERGE
2000 IPS is as follows:
NEAX
Remarks
0.7 m (2.3ft.)
Remarks
Remarks
Remarks
DC Power Cable (-27v input)
External Battery Cable
Remarks
2000 IPS Request For Proposal (RFP) Reference Guide
NEAX
.
Issue 6