NEC UNIVERGE NEAX 2000 IPS Reference Manual page 174

Chapter 9 Feature Descriptions
According to the status of the Multiline Terminal,
function keys (Soft Keys) are displayed in the third
line on the LCD. If the status of Multiline Terminal
changes, the Soft Keys will change automatically.
Also if the Help key is pressed, explanation of
indicated Soft Keys are shown on the LCD.
Volume Control
Multiline Terminals are equipped with common
Volume Control keys for:
• Built-in Speaker / Handset Receiver Volume
• Ring Volume
• C.O. Transmission Level
• LCD Contrast
• Ring Tone Frequency
Remote Hold
This feature allows a Multiline Terminal user
or an attendant to place a call on hold on the
line button of the destination terminal, by
pressing the Hold key.
Remote PIM over IP
When IPS DMR or 2000 IPS PIM are installed
at remote site, and connected to a 2000 IPS
or IPS DM at main site over IP network, the
Main Site system controls and maintains the
remote DMR or IPS PIM operation as one
single system. If a communication failure
occurs between the Main Site and Remote
Site, the Remote Site automatically changes
over to a survival mode and operates as a
stand-alone system.
IPS DMR: IPS Distributed Model Remote (with
CP31-A/B/C)
IPS DM: IPS Distributed Model (with CP24-A/B/C)
Reserve Power
This feature provides backup power from a
24V battery source in the event of a
commercial power failure.
Page 9- 28
Soft Keys
Resident System Program
This feature provides the installers a simple
procedure to have the system generate
system data according to the system
hardware configuration, thereby providing
immediate operation and shorter
programming time. When activated, the
system scans hardware configuration (such
as line/trunk card slot location) and assigns
system data (such as extension numbers,
trunk numbers, etc.) according to a
predetermined generic program assignment.
Return Message Schedule Display
This feature permits any station user to
register his Return Schedule from his phone
when he leaves his desk or the premises, and
have the Return Schedule displayed on a
calling Multiline Terminal with a Liquid Crystal
Display (LCD) during his absence.
Room Cutoff
This feature allows the Attendant Console,
Hotel/Motel (H/M) Front Desk Instrument, or
Property Management System (PMS)
terminal, or guest room telephones using a
special access code, to temporarily restrict
guest room telephones from making
unauthorized calls when guests are away
from their room, and when rooms are in
Check Out status.
Room Status
This feature provides the Hotel/Motel (H/M)
Front Desk Instrument with a visual display of
the guest's room status. A supplementary
print out (individual and summary) can be
provided.
Route Advance
This feature automatically routes outgoing
calls over alternate facilities when the first
choice trunk group is busy. Users select the
first choice route by dialing the corresponding
access code, and the equipment then
advances through alternate trunk groups only
if the first choice is busy.
UNIVERGE 2000 IPS Request for Proposal (RFP) Reference Guide
NEAX
Issue 6