Wireless - Short Text Message Notification (Oai) - NEC UNIVERGE NEAX 2000 IPS Reference Manual

Wireless – Short Text Message Notification (OAI)
This feature enables a Short Text Message (hereafter, STM), once arrived at a mail box of the
STM Server (external equipment), to be automatically distributed to the addressee Dterm PS
III via Open Application Interface (OAI). This feature also provides "TM Full" notification on the
display (LCD) of the address Dterm PS III that is busy, and if the Dterm PS III is out of zone,
the feature makes retransmission of the STM after the PS returns to the zone.
Note: This describes STM Facilities available for external STM OAI application. Actual functionality depends on
the application.
Configuration Application:
Service Conditions
The feature is available only for My Line (L1) of a two-line Dterm PS III (not provided for Sub Line (L2)).
1. STM transmission route is only one way: STM server fi Dterm PS III
2. One STM can contain 128 byte data at the maximum.
3. The following features are not available at this feature.
Call Forwarding - All Calls
Call Forwarding - No Answer
Call Forwarding - Busy Line
Call Forwarding - Not Available
4. If the following occur, STM is not distributed, but stays in the mail box of the STM server. The STM
is safely transmitted later by this feature's retransmission function.
Addressee Dterm PS III is out of zone.
Addressee Dterm PS III is power off.
The line of addressee Dterm PS III is busy, on hold, or ringing.
Dterm PS III is in a state of hand-over. Note
5. With this feature, PCS Roaming is not available.
Note: When hand-over unexpectedly starts while the message transmission is partially in progress, this feature
sees this as a squelch disconnection and performs message retransmission after the hand-over is completed.
UNIVERGE 2000 IPS Request For Proposal (RFP) Reference Guide
NEAX
Issue 6
Integrated Type
Chapter 16 Wireless System
Page 16-7