NEC UNIVERGE NEAX 2000 IPS Reference Manual page 26

Chapter 1 Introduction
Attendant Terminal (Dterm ATT Position)
SMDR Interface
PMS Interface
ACD / MIS or OAI Interface
Remote PIM over IP (Number of PIM for Remote
Sites)
DID Dial Conversion
Call Forwarding-Outside Set
Authorization. Code / Forced Account Code /
Remote Access to System(DISA)Code
Message Reminder Set
Name Display / Guest Name Display
Speed Calling-Station (Station Speed Dial) Set
MP built-in SMDR Call Record
Note: Capacity is for Main site only. For Total System Capacity see IP Remote Network System Capacity.
Page 1-20
IPS System Capacity (Dual MP System, Cont'd)
Item
PIM1 PIM2 PIM3
Max. 2 Interface ports (RS232)
Max 1 interface port (IP) per system
Max. 1 Interface port (RS232)
Max 1 interface port (IP) per system
Max. 1 interface port per system
Up to 30 (depending on network)
UNIVERGE 2000 IPS Request for Proposal (RFP) Reference Guide
NEAX
Capacity Per PIM
PIM4 PIM5
Max. 8 sets per system
1000
496
3000
1024
512
10000
1024
Note
PIM6 PIM7 PIM8
Issue 6