Chapter 16 Wireless System; Univerge Neax 2000 Ips Wireless Communication System (Wcs) - NEC UNIVERGE NEAX 2000 IPS Reference Manual

Chapter 16 Wireless System

U
NIVERGE
NEAX
(WCS)
NEC's wireless technology offers high system capacity, proven system reliability, high voice
quality, network integration, investment protection into the future, and extensive user mobility.
The U
NEAX
NIVERGE
Personal Station (PS) via a Zone Transceiver (ZT). When installing the WCS, there are three
types of Configuration Applications:
1. Integrated Type: Wired for Wireless
The
U
NEAX
NIVERGE
2. Adjunct Type [1]: Analog PBX Interface
The WCS is positioned as a behind system of the existing PBX linked by LC-COT connection.
3. Adjunct Type [2]: CCIS Interface
The WCS is positioned as a behind system of the existing PBX linked by CCIS.
Wired for Wireless
This feature allows the
provides several integrated features adding on the adjunctive configuration.
Service Conditions
1. The service conditions of each feature are the same as for the Single Line Telephone, except for
the following:
Calling Number Display – PS
Last Number Redial – PS
Speed Dial – PS
2. The station number of a Dterm PS III can be assigned flexibly. The limitation of the number and
maximum digits depends on the
Analog PBX Interface
This feature allows the WCS to be integrated with many types of PBXs and to activate various PBX
services by sending hook flash signal and DTMF tone.
Service Conditions
1. The signal type of the following cases can be programmed on a route-by-route basis between the
WCS and the PBX.
To dial for placing a call.
To dial for accessing to the PBX service.
To dial after sending hook flash.
UNIVERGE 2000 IPS Request For Proposal (RFP) Reference Guide
NEAX
Issue 6
2000 IPS Wireless Communication System
2000 IPS Wireless Communication System (WCS) provides interface for
2000 IPS provides both PBX and WCS functions together.
UNIVERGE NEAX
U
NIVERGE
2000 IPS to have the Wireless PBX feature. The IPS
2000 IPS.
NEAX
Page 16-1