NEC UNIVERGE NEAX 2000 IPS Reference Manual page 167

Hands-free Answerback
This feature allows the station user to answer
a voice call without lifting the handset.
Hands-free Dialing and Monitoring
This feature allows the station user to dial or
monitor a call without lifting the handset.
Hold
This feature permits a user to Hold a call in
progress. After Hold has been set, the station
user can make or answer new calls.
This feature permits a user to Hold a call in
progress by sending a hookflash and dialing the
Call Hold feature access code, or by pressing the
Call Hold key. This line can then be used for
originating another call or returning to a previously
held call.
This feature permits a station user who is placed
on Hold by another station to place that station on
Hold also.
Exclusive Hold
This feature allows a Multiline Terminal user to
place a call on Hold and to exclude all other
station users from retrieving the held call.
Non-exclusive Hold
This feature allows a Multiline Terminal user to
place a call on Hold that may be retrieved by any
station that has an appearance of the held line.
Hotel/Motel Attendant Console
The Attendant Console can be programmed
to function as a Hotel/Motel Attendant
Console. In addition to the business features
and functions of the Attendant, the
Hotel/Motel Attendant Console can set Room
Cutoff (individual and group), Automatic Wake
Up, Message Waiting, and Do Not Disturb
(individual and group).
UNIVERGE 2000 IPS Request for Proposal (RFP) Reference Guide
NEAX
Issue 6
Call Hold
Dual Hold
Hotel/Motel Front Desk Instrument
A Multiline Terminal with LCD can be
programmed to function as a Hotel/Motel
(H/M) Front Desk Instrument. This can be
used to set and cancel standard H/M features
such as Message Waiting, Do Not Disturb,
Automatic Wake Up, and Room Cutoff.
Hotline – Inside/Outside
This feature causes the terminal to place a
call to another station or to an outside party
automatically when the user selects the
Hotline extension.
House Phone
This feature allows selected stations to reach
the Attendant simply by going off-hook.
Individual Attendant Access
This feature permits a user to call a specific
Attendant by dialing an Attendant call code.
Intercept Announcement
This feature provides the automatic
interception of Direct Inward Dialing (DID) and
Tie Line calls which cannot be completed due
to unassigned station or level. The caller
hears a recorded Intercept Announcement
that informs the caller that an inoperative
number was reached, and may supply the
number for information.
Intercom
Three types of Intercoms are available:
Manual Intercom, Automatic Intercom, and
Dial Intercom. Each type of Intercom provides
access to a small group of Multiline Terminals
with simplified calling methods.
Chapter 9 Descriptions
Page 9- 21