NEC UNIVERGE NEAX 2000 IPS Reference Manual page 161

Conference (Six/Ten Party)
This feature permits a station user or
Attendant (conference leader) to establish a
Conference among as many as six or ten
parties (including the Conference leader).
Conference (32 Party)
This feature permits a station user, Attendant,
or a trunk party to establish a conference
among as many as 32 parties (including the
conference leader). Two Conference methods
are available: Group Call and Meet-Me
Conference.
Group Call
This feature enables a station user (PS,
Multiline Terminal, Single Line Telephone)
within the system or a trunk party to establish
a conference among as many as 32 parties. It
also enables a station user to page a
maximum of 31 parties simultaneously,
excluding the conference leader. Three Group
Call methods are available: Group Call -
Automatic Conference, Group Call -
Broadcasting, and Group Call - 2 Way Calling.
Group Call - Automatic Conference
This feature enables a station user to establish a
conference among as many as 32 parties. From a
station or Attendant, a maximum of 31
stations/trunks can be paged simultaneously
except the conference leader
Group Call - Broadcasting
This feature enables a station user to page a
maximum of 31 parties simultaneously except the
group call leader. After paged parties answer, the
leader can speak to the paged parties (the paged
parties only hear the leader's voice).
Group Call - 2 Way Calling
This feature enables a station user to page a
maximum of 31 parties simultaneously except the
group call leader. After one of the paged parties'
answers, paging becomes 2-way calling between
the leader and the first answered party and
automatically stops paging other parties
UNIVERGE 2000 IPS Request for Proposal (RFP) Reference Guide
NEAX
Issue 6
.
.
Meet Me Conference
This feature enables station users (PS, Multiline
Terminal, Single Line Telephone) within the
system, Attendants, or trunk parties to join a
conference of as many as 32 parties by dialing a
specific access code. The conference participants
are automatically connected to the conference
trunk. Conference participants may call in at
preset time or may be directed to do so by a
conference coordinator.
Consecutive Speed Dialing
For Speed Dialing, all digits are registered as
a Speed Dialing Code. In the case of
Consecutive Speed Dialing, the common
portion of the number is registered as a speed
calling code, and the remaining digits of each
number are dialed by each individual calling
station or by using a Station Speed Dial key
on a Multiline Terminal.
Consultation Hold
This feature permits a station user to hold any
incoming or outgoing CO call, tie line call, or
any intra-office call while originating a call to
another station user within the system.
Customer Administration Terminal (CAT)
In addition to the Maintenance Administration
Terminal (MAT), programming can be done
from selected Multiline Terminals with LCD.
The designated Multiline Terminals can be
placed in program mode, and system data
can then be changed. To prevent
unauthorized changes, password levels are
assigned, providing authorization for access
to certain areas of programming.
Chapter 9 Descriptions
Page 9- 15